-
Phone
86-559-2130898
-
Address
No. 43 Jieda Road, Huizhou Industry Zone, Huangshan, Anhui, China
-
E-mail
LatestProducts
Tp550-Matting Agent for Powder Coating
China Tp550-Matting Agent for Powder Coating, Find details about China Polyester Hardener, Powder Coating Hardener from Tp550-Matting Agent for Powder Coating - TECH-POWER (HUANGSHAN) LTD.
Description
Basic Info
- Model NO.: TP550
- Appearance: Powder
- Special Function: Powder Coating
- Auxiliary System: Hardener
- Transport Package: 25kgs Per Bag
- Kind: Powder Coating
- Application: Appliance Paint
- Property: Powder Coating
- Trademark: TP
- Origin: China
Product Description
TP550-MATTING AGENT FOR POWDER COATING
General Desription:
MATTING AGENT TP550 is a kind of polymer with epoxied mass.It has good outdoor performance.It is used for curing polyester resin and reducing powder coating gloss like B68.
The lowest gloss can reach 5°(60 angle conner) and could setup the gloss degree by adding its quantity.
In china it is used widely in polyester type powder coating.
Typical properties:
Referenced formulation:
Condition: 200ºC 10-12 minutes
Result: Gloss 3-5°,Impact:50kgf pass
Package, storage and other precautions:
1. Store in a cool and dry place to avoid contacting other chemical products. Seal tightly after
using. As this product is irritant to respiratory tract, please wear dustproof mask and glove when operating.
2. Package: 20kgs/polyethylene-lined kraft paper-plastic compound bag.
3. Validity will be 2 years under normal temperature.
Put some tgic in order to reach sightly higher gloss level.
General Desription:
MATTING AGENT TP550 is a kind of polymer with epoxied mass.It has good outdoor performance.It is used for curing polyester resin and reducing powder coating gloss like B68.
The lowest gloss can reach 5°(60 angle conner) and could setup the gloss degree by adding its quantity.
In china it is used widely in polyester type powder coating.
Typical properties:
| Appearance | transparent grain or white powder. |
| Epoxy equivlent | 650-750g/eq |
| Soft point | 110-125ºC |
| Viscosity | 220c/pa.s |
| Volatile | 1%max |
Referenced formulation:
| Polyester resin(35mgKOH/g) | 34 |
| TP550 | 11 |
| TP88 | 1.3 |
| TGIC | 0.40% |
| TiO2 | 16 |
| BaSO4 | 13 |
| Accelerant | 1.1 |
Condition: 200ºC 10-12 minutes
Result: Gloss 3-5°,Impact:50kgf pass
Package, storage and other precautions:
1. Store in a cool and dry place to avoid contacting other chemical products. Seal tightly after
using. As this product is irritant to respiratory tract, please wear dustproof mask and glove when operating.
2. Package: 20kgs/polyethylene-lined kraft paper-plastic compound bag.
3. Validity will be 2 years under normal temperature.
Put some tgic in order to reach sightly higher gloss level.
